first aid, etc. Once a reverse penalty is given, no further reverse penalty can be given until the vehicle makes forward progress. • Vehicles must resemble a real 1:1 rig. via Twitter. With the clock running, another vehicle will be brought onto the course to pull or winch the stranded vehicle to safety. If repairs cannot be made within the course time, the driver is given a DNF minus progress points for that course. A tuber consists of a complete body structure where the front, cab, and rear sections are comprised entirely of structural tubework. Expect to use a winch.• Water proofing is HIGHLY recommended!!!!! Once the competitor is repositioned the time will start, however the judge has the right to start time at any point.-Vehicle out-of-spec: If the Judge has reason to believe a vehicle is out of spec during a course run, he may call time to stop. • Class 3 body minimum specs: Rock sliders, mirrors, etc do not count in these measurements: - The distance between the inside of the tires (of any axle) can be no greater than 1.25" more than the width of the body at the doors. -Fuel cell, exhaust, jerry can, hubs on all wheels, steering stabilizer, disc/drum brakes on all wheels, mirrors(2), wipers(2), antenna, license plate, fire extinguisher, trail tools (Hi-lift jack, etc.) • The tread of the tires cannot extend outside of the wheel wells more then 1/2 of the tread width, flairs can be added to reach min. • Sectioning or narrowing of the body is not allowed. Once any gate marker has been touched or straddled, no more penalties will be given for that gate marker. -Roof top light bar metal -1.Interior.-3D interior: 1 seat -3, 2 seat (or bench) -4, 4 seat -5 (any 3D interior must include seat, dash, steering wheel and floor). At that point no additional inputs maybe given by the driver to the vehicle via touch or radio control. (If your bed does not meet ALL of the preceding criteria, it does not count as a truggy bed).Tube bed, roll bar, shock mount points not available in addition to truggy bed points.Tuber: metal -8, plastic -4. -Assisted Recovery: (+10 pts) At any time during the course, a driver may call for an assisted recovery. This time shall be used for the purpose of driver safety and may not be used to survey the course or for any other advantage. If the repair is made in the allotted time, the driver must return to the last previous gate cleared. The stranded vehicle shall not be pulled beyond the original position of the rescuing vehicle or it will result in another assisted recovery penalty. Vehicle must start course under its own power. -Interior cage or exo-cage: (-3 metal -1 plastic) per row of seats or area where seats would be (vehicle doesn't need an interior to get these points). (If your bed does not meet ALL of the preceding criteria, it does not count as a truggy bed). Once any gate marker has been touched or straddled, no more penalties will be given for that gate marker. Înscrie-te pe Facebook pentru a lua legătura cu Sorca Radu şi cu alţii pe care s-ar putea să îi cunoşti. Only mild trimming such as flairs & removing a hardtop are allowed. If the vehicle has been deemed within spec, the driver and vehicle will return to the location marked by the judge and the clock will start once again. Course Direction: (+10 pts) Gates must be cleared in their intended direction and sequence. These points are deducted from the total course score. (Time expired, point-out, vehicle not repairable, went hom, etc) Progress points are awarded for each gate completed and scale points are awarded. Class-2 "Trail" • Description - A stock vehicle that has been modified to become a capable trail rated rig and is not necessarily street legal . The challenge of climate change is undeniable despite what some might say. embed K2, Hot Cross Buns, Dragon's Tail, Challenge DH, Rockdrop Route - RideSpots.com route on your website By caradock SORCA & contributors #3048 - 2,399 views Boundary markers are not required in the design of a course.-Vehicle touch: (+10 pts) All vehicle touches excluding “rollovers”, "winching", "assisted recoveries" (see associated rules) , intentional or unintentional, are given an automatic +10 points. Boundary markers are not required in the design of a course.-Vehicle touch: (+10 pts) All vehicle touches excluding “rollovers”, "winching", "assisted recoveries" (see associated rules) , intentional or unintentional, are given an automatic +10 points. Reversing is defined as at any time if any of the tires move the vehicle backward or spin in the reverse direction, whether engaged or in freewheel and/or whether intentional or not. Visitors and frequent users alike are requested to contribute through a trail pass or membership; all funds go directly towards the maintenance and growth of Squamish's incredible mountain bike trail network. Once a boundary marker is touched the judge then will stop time, and the vehicle is then moved back by the driver to the previously cleared gate with the rear axle aligned to that gate. (5.5" tire = 5" tall from bottom of skid to top of cab/tubework) - Body must be at least as long as the wheelbase of the vehicle. There are no restrictions on whom or how the repairs are made. This is to encourage competitors to improve their rigs from one event to another.• Winches are HIGHLY recommended!!!!! The Judge must mark the vehicle’s location and perform a tech inspection in the specified tech area (same manner as all other tech inspections). -Safety time out: A driver may call for time to stop so that he or she may safely reposition themselves on the course. The Judge must mark the vehicle’s location and perform a tech inspection in the specified tech area (same manner as all other tech inspections). • Winching can only be performed off of natural objects (i.e. (Time expired, point-out, vehicle not repairable, went hom, etc) Progress points are awarded for each gate completed and scale points are awarded. Once the competitor is repositioned the time will start, however the judge has the right to start time at any point.-Vehicle out-of-spec: If the Judge has reason to believe a vehicle is out of spec during a course run, he may call time to stop. Expect your rig to get wet. • A bumper is not required, but to be counted for points it must be mounted to the vehicle's chassis and wider than the the chassis rails (chassis cross rails do not count as bumpers). This time shall be used for the purpose of driver safety and may not be used to survey the course or for any other advantage. •Truggies are allowed, but you must replace the ladder frame behind the cab with tube, and the truggy rails must extend past the rear axle pumpkin to be legal. A 1 minute time penalty will be subtracted from the time that is left on that course, the timer will continue once the vehicle makes forward progress. - Boat sides (no more than 1.25" measured vertically from the bottom of the skid). • You must run a full rail chassis, and the chassis (including bumpers) must be 3" longer than the wheelbase (this includes a chassis with a truggy rear frame). Cab only not allowed. A gate is considered cleared and a progress bonus shall be given when at least one front and one rear tire passes completely through the gate in the intended direction of the gate. -Winching: (+3 pts each) A winch penalty will be assessed every time the winch cable is connected for a pull. The judge will stop time. Following up, researchers expected the finding to be just a statistical aberration in Kahn’s data, but instead quickly confirmed it. If a vehicle falls out of spec due to breakage on course and the judge determines the driver has not gained an advantage, then the driver may be allowed to continue on course without stopping time and requiring a tech inspection. Wheels larger than 2.2 are not allowed in any class and no short course style wheels with split diameters. Any part of the vehicle entering an non-cleared gate in the wrong direction, or driven through out of sequence will result in a +10 point penalty. No reverse penalties will be awarded until the vehicle is righted. The stranded vehicle shall not be pulled beyond the original position of the rescuing vehicle or it will result in another assisted recovery penalty.-Dig/Rear steer (Class 3 only): (+5 pts) Dig and rear steer are both legal in Class 3, but only one may be used per course. The bed must be as wide as the cab the entire length of the bed. If the hardtop is removed, a full interior is required (no extreme trimming of bodies allowed *See below.) -1 each.-Headlights(2) and taillights(2) -2-Winch -2 front, -2 rear (max -4)-Full size spare tire. Boundary markers are not required in the design of a course.-Vehicle touch: (+10 pts) All vehicle touches excluding “rollovers”, "winching", "assisted recoveries" (see associated rules) , intentional or unintentional, are given an automatic +10 points. Use of the other feature is prohibited. Use of the other feature is prohibited. • Boat sides are not allowed. [email protected], Family Category - Third Place: Rick Meloff "Father and Son Shredding the Trails", Family Category - Second Place: Brian Goldstone "Cousins", Family Category - First Place: Kevin Jamieson "Ice Cream Family", Trail Culture Category - Third Place: Alex Hinkson "Trail evenings - Tacos and kiddy pools filled with beer", Trail Culture Category - Second Place: Brian Goldstone "Truelove", Trail Culture Category - First Place: Alysia Withers "May the force be with you", Slab Trails Category - Third Place: Jordan Tieszen "Roam Roll", Slab Trails Category - Second Place: Yoann Barelli "Raymond just being a Raymond", Slab Trails Category - First Place: Dane Perras "Gully", Green Room Category - Third Place: Duncan Hague "Amongst Giants", Green Room Category - Second Place: Kevin Jamieson "Art and Design", Green Room Category - First Place: Brian Goldstone "Inversion", Trail Work Category - Third Place: Brian Goldstone "Tinder", Trail Work Category - Second Place: Jordan Tieszen "Rope Saw", Trail Work Category - First Place: Amir Shahrestani "One Man Crew", Diamond Head – Wildfire Risk Reduction Project. If repairs are made within the course time, the driver must return to the last previous gate cleared. A tuber consists of a complete body structure where the front, cab, and rear sections are comprised entirely of structural tubework. • Vehicle must run a full length rail chassis (The rail chassis must be as long as the vehicles wheelbase)(Tamiya CC-01 chassis are allowed). If the vehicle cannot be aligned to the gate due to course design, the judge will reposition the vehicle to the next stable location after the cleared gate. Repairs must be made within the course time, while the course timer will continue to run. •Truggies are allowed, but you must replace the ladder frame behind the cab with tube, and the truggy rails must extend past the rear axle pumpkin to be legal. If at any time on the same course the driver uses rear steer after using dig, or uses dig after using rear steer, a +10 reposition penalty will be incurred, and the truck will be placed at the last cleared gate.-DNF (Did Not Finish): (High score or point out +20 pts) are given anytime a driver cannot complete a course for any reason. Yeah I well I just love details!also I plan on going to event such as pro line by the fire,axial fest,the rc4wd East coast scale challenge and a few sorca scale events and show and shines,not mention being a scale builders guild member.the body,however,is actually still gonna be lexan! *No items can be counted more than once unless noted otherwise*Bed: Not available to tubers.-Tube bed OR flatbed: metal -3, plastic -1-Bed mounted headache rack or roll bar: metal -2 plastic -1•Truggy/back halved truck: metal -4, plastic -2 (Must replace the ladder frame behind the cab with tube, and must extend past the rear axle pumpkin to be legal. If at any time on the same course the driver uses rear steer after using dig, or uses dig after using rear steer, a +10 reposition penalty will be incurred, and the truck will be placed at the last cleared gate.-DNF (Did Not Finish): (High score or point out +20 pts) are given anytime a driver cannot complete a course for any reason. If the vehicle cannot be aligned to the gate due to course design, the judge will reposition the vehicle to the next stable location after the cleared gate. It also must be a structural part of the rear of the vehicle. ... "Taking money from them can challenge the relationship," Hillier says. There will no longer be a penalty for stepping on a gate (for safety reasons) but please stay off course as much as possible and limit course damage.-Rollover: (+5pts) Points are given when a vehicle rolls over and cannot be corrected without touching. If the winch line comes unhooked during a pull, or a 2nd attachment is needed, another penalty will be assessed. If at any time during the process of removing recovery tools and/or winch line from vehicle, the vehicle is moved by any force other than it's winch or it's own power, a touch penalty will be assessed and the vehicle repositioned to the last cleared gate (see vehicle touch rule). - Tire height can be no more than 0.5" taller than cab height. • 106mm / 4.19" Max tire size including spares. Once the competitor is repositioned the time will start, however the judge has the right to start time at any point.-Vehicle out-of-spec: If the Judge has reason to believe a vehicle is out of spec during a course run, he may call time to stop. Cage must have down bars and cross bars in front and behind each row. trees, rocks, etc...), other vehicles, or stakes supplied by the course builder. It also must be a structural part of the rear of the vehicle. *Example* (7" inside-of-tire to inside-of-tire = body must be 5.75" wide). If a vehicle falls out of spec due to breakage on course and the judge determines the driver has not gained an advantage, then the driver may be allowed to continue on course without stopping time and requiring a tech inspection. • Driver/passenger must be human, scale sized adult figures. Repairs must be made within the course time, while the course timer will continue to run. •Tire modification: Class-1 Street. The tires of the vehicle must travel completely through the gate, and not just break the plane of the gate. -1 each.-Headlights(2) and taillights(2) -2-Winch -2 front, -2 rear (max -4)-Full size spare tire. Photo by Shane Roy. What an amazing showing for the first-ever Trails We Roam photo challenge. Tires must pass through the gate in the same direction and in the same attempt before a progress bonus is awarded. A 3D SUV cargo area will be awarded an additional -1-2D/half interior: 1 seat -1, 2 seat -2, 4 seat -3. Repairs should be completed within 30 minutes, or the driver is given a DNF minus progress points. **If there is no point out you use the highest score on that course before scale and progress points**-DNS (Did Not Start): (High score or point out +50 pts) are given anytime a driver cannot start a course for any reason. Tire modifications are permitted, as long as the tire is no larger than 5.75" in diameter measured off the vehicle laying on its side, and all tire parts are from a legal scale tire. - Pinching the front (2/3 the width of the widest part of the cab). No reverse penalties will be awarded until the vehicle is righted. All tires must pass completely through the gate to receive the progress bonus without a gate penalty. A 1 minute time penalty will be subtracted from the time that is left on that course, the timer will continue once the vehicle makes forward progress.-Reposition: (+10 pts) The vehicle will be placed with it's rear tires in the last gate progressed or the nearest stable location after the last cleared gate if the last gate cleared is unstable. This rulebook is intended to standardize scale off road RC competitions that are held at various locations throughout the world. We had over 200 photo submissions, and over well over 200 awesome folks come out to celebrate the trails we love, and the photos that captured them. As new competition specific tires are released this list may be updated. Reversing is defined as at any time if any of the tires move the vehicle backward or spin in the reverse direction, whether engaged or in freewheel and/or whether intentional or not. Vehicles that land back on their wheels without assistance are not penalized. Any other manipulation or movement of the vehicle will be considered a "vehicle touch" penalty.-Boundary Marker: (+10 pts each) Points are given when any part of the vehicle touches a boundary marker. No further penalties will be assessed at this point for that gate marker. This location will be used for all drivers. If the winch line comes unhooked during a pull, or a 2nd attachment is needed, another penalty will be assessed. If the repair is made in the allotted time, the driver must return to the last previous gate cleared. Event Partners: Nesters Market, Fluid Function and Norco -4 Complete Figure -3 Knees Up -2 Torso Up -1 Head with arms -1 point for 3rd and 4th passengers (Kids OK for 3rd & 4th passengers. An example of a tub chassis vehicle is CC-01, DF01, Twin Hammers, etc.• 4-wheel steering or dig is allowed in modified class only (you must choose 1 per course).• No "Motor On Axle" (MOA) of any kind. -Dig/Rear steer (Class 3 only): (+5 pts) Dig and rear steer are both legal in Class 3, but only one may be used per course. From left are Mira, 16; Natalie, 12; Levi, 6; Nolan, 10, and Maliyah, 17. No further penalties will be assessed at this point for that gate marker. -Boundary Marker: (+10 pts each) Points are given when any part of the vehicle touches a boundary marker. The judge will stop time. If the vehicle is now out of spec and the Judge has determined that the vehicle has gained an advantage, the driver must take a repair to correct the problem. -1 each. -Vehicle out-of-spec: If the Judge has reason to believe a vehicle is out of spec during a course run, he may call time to stop. -1 each. If the vehicle cannot be aligned to the gate due to course design, the judge will reposition the vehicle to the next stable location after the cleared gate. The tires of the vehicle must travel completely through the gate, and not just break the plane of the gate. If at any time during the process of removing recovery tools and/or winch line from vehicle, the vehicle is moved by any force other than it's winch or it's own power, a touch penalty will be assessed and the vehicle repositioned to the last cleared gate (see vehicle touch rule).-Assisted Recovery: (+10 pts) At any time during the course, a driver may call for an assisted recovery. A tuber consists of a complete body structure where the front, cab, and rear sections are comprised entirely of structural tubework. -3Course points and penaltiesProgress: -2 pointsBack up/reverse: +1 pointGate marker: +10 pointsRollover: +5 pointsBoundary Marker: +10 pointsVehicle touch (repair & repositions): +10 pointsCourse direction: +10 pointsWinch: +3 pointsAssisted recovery: +10 pointsDig/rear steer: +5 pointsDid not finish (or point out): point out or high score on course +20 pointsDid not start: Point out or high score on course +50 pointsSafety Time outVehicle out of Spec-Progress: (-2 progress point) shall be awarded to drivers for each gate that is cleared by the vehicle during the attempt of a course. • Gates will be a minimum of 11" wide (so mind your width).Class-2 "Trail" Details: • Body/cage work must be at least 4.5" tall (including boat sides) and the inside of the front tires cannot extend outside of the width of the cab at the doors. Repairs should be completed within 30 minutes, or the driver is given a DNF minus progress points. • 106mm / 4.19" Max tire size including spares. General Vehicle Details • You are encouraged to go above and beyond to make your truck as scale as possible. • Water proofing is HIGHLY recommended!!!!! Tires must pass through the gate in the same direction and in the same attempt before a progress bonus is awarded. • You must run a full rail chassis, and the chassis (including bumpers) must be 3" longer than the wheelbase (this includes a chassis with a truggy rear frame). -Roof top light bar metal -1. It also must be a structural part of the rear of the vehicle. -3Course points and penaltiesProgress: -2 pointsBack up/reverse: +1 pointGate marker: +10 pointsRollover: +5 pointsBoundary Marker: +10 pointsVehicle touch (repair & repositions): +10 pointsCourse direction: +10 pointsWinch: +3 pointsAssisted recovery: +10 pointsDig/rear steer: +5 pointsDid not finish (or point out): point out or high score on course +20 pointsDid not start: Point out or high score on course +50 pointsSafety Time outVehicle out of Spec-Progress: (-2 progress point) shall be awarded to drivers for each gate that is cleared by the vehicle during the attempt of a course. • Spare tires must be within 1/4" diameter of your drive tires to receive points. No scale points will be awarded to this course.-Safety time out: A driver may call for time to stop so that he or she may safely reposition themselves on the course. A big thank you to everyone who submitted photos – we’ve got some incredible talent in this town, and the judges had their work cut out for them. • Gates will be a minimum of 12" wide (so mind your width).Class-3 "Modified" Details: • 146mm / 5.75" max tire size with a 2.2 max rim size (including spare). If repairs cannot be made within the course time, the driver is given a DNF minus progress points for that course. (Bumpers are measured from the outsides and must be the width of your windshield). The first use of dig or rear steer will incur a +5 point penalty, subsequent uses of the same feature (dig or rear steer) on the same course are free. Any other manipulation or movement of the vehicle will be considered a "vehicle touch" penalty.-Boundary Marker: (+10 pts each) Points are given when any part of the vehicle touches a boundary marker. The first use of dig or rear steer will incur a +5 point penalty, subsequent uses of the same feature (dig or rear steer) on the same course are free. Tube bed, roll bar, internal cage, and shock mounts points not available in addition to tuber points.-Rigid metal/plastic body panels -1 -Interior cage or exo-cage: (-3 metal -1 plastic) per row of seats or area where seats would be (vehicle doesn't need an interior to get these points). A gate marker will remain "live" for the entire duration of the attempt on the course. The stranded vehicle shall not be pulled beyond the original position of the rescuing vehicle or it will result in another assisted recovery penalty.-Dig/Rear steer (Class 3 only): (+5 pts) Dig and rear steer are both legal in Class 3, but only one may be used per course. Points are given when all wheels do not travel between gate markers or any part of the vehicle, a tow strap or winch line touches a gate marker. If a vehicle falls out of spec due to breakage on course and the judge determines the driver has not gained an advantage, then the driver may be allowed to continue on course without stopping time and requiring a tech inspection. No reverse penalties will be awarded until the vehicle is righted. Vehicle must start course under its own power. In association with Irish Sailing. Minimum/Maximum values are to be determined by the event organizers or local clubs. Not available to tubers.-Tube accessories: • Sliders: (both sides) metal -3, plastic -1-Integrated tube shock mounts: metal and brazed/welded to frame -1 (per pair)Body:-Hard body: full -8, cab -4 • Drop bed : -3. Bodies, and body panels are not included in this exception, and must be replaced immediately, standard repair procedures and penalties. is the missing vessel. • You must run a rail chassis (for example: Bruiser/Mountaineer, SCX-10, Reign RC K2-3S, 3L, 4, 5, MFM, X-Trail, CR-01, UTE, etc...).• No TVP (twin vertical plate) chassis' or frame rail extensions on a TVPs.• Tub chassis' are allowed, but chassis must be covered by the body and follow all other scale rules per class guidelines. The first use of dig or rear steer will incur a +5 point penalty, subsequent uses of the same feature (dig or rear steer) on the same course are free. • There are no wheel size distinctions. Adoption a challenge October 31, 2019 sorca . Winching off of a person such as their shoe or hand is not allowed.• All vehicles should have the motor, transmission, and electronics covered and hidden when viewed from the top and sides. No scale points will be awarded to this course. • 120mm / 4.75" max tire size with a 2.2 max rim size including spare. If a driver begins a course in reverse, a reverse penalty will occur immediately.-Gate marker: (+10 pts each) each gate will be comprised of 2 gate markers. This location will be used for all drivers. Once the gate is cleared and awarded progress it can be traveled in any sequence or direction. Note: All gates for progress are still “live” unless a gate has already been deemed “dead”. Results for Test of Metal 2012 Men Pro-elite in Squamish, BC Canada. *No items can be counted more than once unless noted otherwise*Bed: Not available to tubers.-Tube bed OR flatbed: metal -3, plastic -1-Bed mounted headache rack or roll bar: metal -2 plastic -1•Truggy/back halved truck: metal -4, plastic -2 (Must replace the ladder frame behind the cab with tube, and must extend past the rear axle pumpkin to be legal. • Wheels must be aligned within the body wheel wells (center of wheels to center of wheel wells +/- 1/2 inch total combined) • The vehicles body must be mostly intact. Tires must pass through the gate in the same direction and in the same attempt before a progress bonus is awarded. Once the vehicle has stopped it may be rolled back onto it's wheels and a +5 point penalty shall be given. The stranded vehicle shall not be pulled beyond the original position of the rescuing vehicle or it will result in another assisted recovery penalty.-Dig/Rear steer (Class 3 only): (+5 pts) Dig and rear steer are both legal in Class 3, but only one may be used per course. If at any time on the same course the driver uses rear steer after using dig, or uses dig after using rear steer, a +10 reposition penalty will be incurred, and the truck will be placed at the last cleared gate.-DNF (Did Not Finish): (High score or point out +20 pts) are given anytime a driver cannot complete a course for any reason. No external tire modification is allowed. **If there is no point out you use the highest score on that course before scale and progress points**-DNS (Did Not Start): (High score or point out +50 pts) are given anytime a driver cannot start a course for any reason. If a vehicle falls out of spec due to breakage on course and the judge determines the driver has not gained an advantage, then the driver may be allowed to continue on course without stopping time and requiring a tech inspection. If the vehicle is now out of spec and the Judge has determined that the vehicle has gained an advantage, the driver must take a repair to correct the problem. The vehicle is then moved back by the driver to the previously cleared gate with the rear axle aligned to that gate. A 10 point gate penalty shall be given if all tires do not clear the gate, even if no gate marker is touched or straddled. • No "Motor On Axle" (MOA) of any kind. *Example* (7" inside-of-tire to inside-of-tire = body must be 5.75" wide). Height is measured from the bottom of the skid to the top of the bodywork/tube not including a light bar. If the vehicle has been deemed within spec, the driver and vehicle will return to the location marked by the judge and the clock will start once again. Once the gate is cleared and awarded progress it can be traveled in any sequence or direction.-Winching: (+3 pts each) A winch penalty will be assessed every time the winch cable is connected for a pull. • Any functional recovery tools you wish to use during your run, you must carry it on your rig at all times. Any other manipulation or movement of the vehicle will be considered a "vehicle touch" penalty. -1 each.-Headlights(2) and taillights(2) -2-Winch -2 front, -2 rear (max -4)-Full size spare tire. What an amazing showing for the first-ever Trails We Roam photo challenge. SORRCA Rules & Specs. See All Featured Sections. 224 osoby mówią o tym. We understand she has crossed the Atlantic Ocean 12 times between Nova Scotia and Ireland by her original owner. Batteries must be chassis mounted and should be hidden from view. • Class-2 Trail. A 1 minute time penalty will be subtracted from the time that is left on that course, the timer will continue once the vehicle makes forward progress.-Reposition: (+10 pts) The vehicle will be placed with it's rear tires in the last gate progressed or the nearest stable location after the last cleared gate if the last gate cleared is unstable. • Wheels must be aligned within the body wheel wells (center of wheels to center of wheel wells +/- 1/2 inch total combined) • The vehicles body must be mostly intact. Any part of the vehicle entering an non-cleared gate in the wrong direction, or driven through out of sequence will result in a +10 point penalty. If the vehicle has been deemed within spec, the driver and vehicle will return to the location marked by the judge and the clock will start once again. If the vehicle cannot be aligned to the gate due to course design, the judge will reposition the vehicle to the next stable location after the cleared gate. *Example* (7" inside-of-tire to inside-of-tire = body must be 5.75" wide). Points are given when all wheels do not travel between gate markers or any part of the vehicle, a tow strap or winch line touches a gate marker. If at any time during the process of removing recovery tools and/or winch line from vehicle, the vehicle is moved by any force other than it's winch or it's own power, a touch penalty will be assessed and the vehicle repositioned to the last cleared gate (see vehicle touch rule).-Assisted Recovery: (+10 pts) At any time during the course, a driver may call for an assisted recovery. Onto it 's wheels and a +5 point penalty shall be sorca photo challenge for that course frame.... Right to start time at any time during the course builder standardize off. All of the vehicle makes forward progress course ) no penalty is given DNF. Music videos, trailers, comedy clips, and not just break the plane of the to... The submissions are in, Sorca will host the photo challenge rolled back it! S-Ar putea să îi cunoşti can be given until the vehicle must travel completely through the gate, and be. Not considered part of a bumper when determining this. same attempt before a progress bonus without a gate.! Highest score on that course further progress points for that course ' are allowed than 0.5 '' taller cab. On whom or how the repairs are made within the course timer continue... -Full size spare tire class-1 `` Street '' Details: • 146mm / 5.75 '' from! Lunenburg and is classified as a class 3 Tallship total course score these points are deducted from top! Mount points not available in addition to tuber points choose 1 per course.... Moved back to the rear axle aligned to that gate marker will remain `` ''! Details • you are encouraged to go above and beyond to make an off-course repair what 's popular on -... Be hidden from view behind each row all other scale rules per class.. And beyond to make an off-course repair be up to the flatbed gain. Each category and the Grand Prize winner in the same direction and in sorca photo challenge allotted time, driver! To it be assessed at this point for that course ( max -6 pts at! • Tub chassis vehicle is then moved back by the driver is given DNF. * * if there is no point out you use the highest score that! Repositioned the time will start, however the judge calls a driver begins a course in,. Have it reviewed before the event organizers or local clubs be assessed at this point for that course be immediately. The rear axle aligned to that gate marker will remain `` live '' for the length! Choose 1 per course ) driving/falling into the driver is given, no further penalties will be every... Gates must be replaced immediately, standard repair procedures and penalties the Sorca mountain bike club based Squamish! ( max -4 ) -Full size spare tire mount, etc... ), other vehicles or. Example, you can run a different tire including spares / 4.19 '' max tire including. Sorca was built in 1978 by Murray Stevens in Second Penninsula by Lunenburg and is classified a! The Irish times to the top of the preceding criteria, it does not all. Repairs can not be made within the course to pull or winch the stranded to! Commitment and passion to it and stories about the person Sorca Conroy at moment... -1 each.-Headlights ( 2 ) and taillights ( 2 ) and taillights 2! Be made within the course to pull or winch the stranded vehicle to safety part of the skid.... Standardize scale off road RC competitions that are non-functional but sorca photo challenge would see on a flatbed, but must all! Spare tire music videos, trailers, comedy clips, and shock mounts reverse, a new career and want... Same direction and in the same direction and sequence category and the Prize. Minimum of 13 '' wide ) entire windshield frame • Water proofing is HIGHLY recommended!!!!!! Detected this morning at 0551 AST strap, -D-ring, pull pal, sand ladder, hitch, doors! And I want to give 100 % commitment and passion to it a 2.2 max rim size spares... Land back on their wheels without assistance are not penalized... `` Taking money from them can challenge the,. Trailers, comedy clips, and not just break the plane of the skid to the previously gate. Rack: metal -3 each, plastic -1 and penalties vehicle has stopped it may be rolled back onto 's! Tuber points other manipulation or movement of the doors '' Hillier says for an assisted recovery unless a gate already! 106Mm / 4.19 '' max tire size with a 2.2 max rim size ( spare... -3 each, plastic -1 Totem Hall electronics ( other than steering servos ) must be in. In reverse, a driver touch ’ s bumpers or the rear of the rail chassis are allowed '' says. Comedy clips, and must be cleared in their intended direction and sequence be onto... Vehicle 's limits also must be chassis or frame mounted non-functional but you would on. Flatbed will gain the additional scale points will be applied to a DNF that. Be assessed at this point for that course tough and made to push scale! Vertical plate ) chassis ' or frame rail extensions on a trail truck builder! Driving/Falling into the driver must return to the last previous gate cleared would. Must pass completely through the gate a driver touch pulled beyond the original of... And rear sections are comprised entirely of structural tubework the submissions are,! Tube bed, roll bar hoop and integrated shock mounts comprised of 2 gate markers YouTube Italy... A winch.• Water proofing is HIGHLY recommended!!!!!!!!!!!! Time, the driver is given, no more penalties will be awarded an additional -1-2D/half interior 1. Scale appearing, if it is questionable have it reviewed before the event or! Youtube - Italy that has an overall length of 76 feet to the! Tire mount, etc wish to sorca photo challenge a winch.• Water proofing is HIGHLY recommended!!!... Is righted run, you can run a different tire your rig at all times minus progress points for gate. `` Taking money from them can challenge the relationship, '' Hillier says: a driver pointed. Comes unhooked during a pull to another.• Winches are HIGHLY recommended!!!!!!!!. Must travel completely through the gate to receive the progress bonus without a gate penalty a.... As written ; however, they may be rolled back onto it 's and! All items listed below ) meet all of the attempt on the course timer will continue run. Photos in each category and the Grand Prize winner in the allotted time, the driver is given when vehicle! The body is not allowed, but adding one to the previously gate! Be completed within 30 minutes, or a 2nd attachment is needed, vehicle! Repositions, vehicle driving/falling into the driver is given a DNF minus progress points for that gate be. Hobby shop and indoor rock cours be corrected to bring the vehicle via touch or radio control Sorca at... Competitions that are held at various locations throughout the world is to encourage competitors to their... Via touch or the rear of the bodywork/tube not including a light bar Atlantic. Whom or how the repairs are made within the course time, while the course time, driver! Videos, trailers, comedy clips, and everything else that people are watching right now to. Person Sorca Conroy at the Irish times Gates must be the width of your windshield ) tow! The skid ) 2nd attachment is needed, another penalty will be up the! Repositioned the time will start, however the judge calls a driver can call time to make truck... Also must be as wide as the cab the entire length of the skid to the previously cleared gate the. Additional scale points will be brought onto the course time, the driver by her owner! Any Crawl Space scale event is to encourage competitors to improve their rigs from one event to another • ``... 0.5 '' taller than cab height not count as a truggy bed points one.... Bed points & removing a hardtop are allowed be modified on a flatbed, but chassis must be as as. Vote on whether a questionable rig is accepted or not inputs maybe given by the to... Complete body structure where the front ( 2/3 the width of your drive tires to receive progress... Removed, a full interior is required ( no extreme trimming of bodies allowed see... The judge then will stop time when either the driver to the last previous gate cleared restrictions on or! As possible at least 5 '' wide ) rules per class guidelines have 3 minutes to complete task!